Loading...
Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Technology
Chan, Chi-Wai Lee, Seunghwan Smith, Graham C. Sarri, Gianluca Ng, Chi-Ho Sharba, Ahmed Man, Hau-Chung
Chan, Chi-Wai
Lee, Seunghwan
Smith, Graham C.
Sarri, Gianluca
Ng, Chi-Ho
Sharba, Ahmed
Man, Hau-Chung
Advisors
Editors
Other Contributors
EPub Date
Publication Date
2016-03-30
Submitted Date
Collections
Files
Loading...
Article
Adobe PDF, 560.24 KB
Other Titles
Abstract
The relatively high elastic modulus coupled with the presence of toxic vanadium (V) in Ti6Al4V alloy has long been a concern in orthopaedic applications. To solve the problem, a variety of non-toxic and low modulus beta-titanium (beta-Ti) alloys have been developed. Among the beta-Ti alloy family, the quaternary Ti-Nb-Zr-Ta (TZNT) alloys have received the highest attention as a promising replacement for Ti6Al4V due to their lower elastic modulus and outstanding long term stability against corrosion in biological environments. However, the inferior wear resistance of TNZT is still a problem that must be resolved before commercialising in the orthopaedic market. In this work, a newly-developed laser surface treatment technique was employed to improve the surface properties of Ti-35.3Nb-7.3Zr-5.7Ta alloy. The surface microstructure and composition of the laser-treated TNZT surface were examined by grazing incidence x-ray diffraction (GI-XRD) and x-ray photoelectron spectroscopy (XPS). The wear and corrosion resistance were evaluated by pin-on-plate sliding test and anodic polarisation test in Hanks’ solution. The experimental results were compared with the untreated (or base) TNZT material. The research findings showed that the laser surface treatment technique reported in this work can effectively improve the wear and corrosion resistance of TNZT. The enhancement of such surface properties was due to the formation of a smooth and hard layer on the substrate surface. The laser-formed layer was metallurgically bonded to the substrate, and had no concern of coating delamination or peel-off.
Citation
Chan, C.-W., Lee, S., Smith, G., Sarri, G., Ng, C.-H., Sharba, A., & Man, H.-C. (2016). Applied Surface Science, 367, 80-90.
Publisher
Elsevier
Journal
Applied Surface Science
Research Unit
DOI
10.1016/j.apsusc.2016.01.091
PubMed ID
PubMed Central ID
Type
Article
Language
en
Description
Series/Report no.
ISSN
0169-4332
EISSN
ISBN
ISMN
Gov't Doc
Test Link
Sponsors
Acknowledgments The work described in this paper was supported by research grants from the Hong Kong Polytechnic University (G-YK36 and G-YM75), Hong Kong Special Administration Region, China, and the Queen’s University Belfast (Start-up Research Fund: D8201MAS), United Kingdom.